What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 07:10

“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Now when you have a certain ac resistance, then a current flows in a loop.
but this device (an Inductor) … impedes the rapid changes in the current.
He said he loves me, but why is it difficult for him to leave his wife?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What is lightning?
There are two important concepts here.
PlayStation Plus new free game is the service's first 'AAAA' - GAMINGbible
what exactly is a ‘surge’ protector?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The bolt then partially travels down the line to your home.
This is where this question deviates from being a 'generic' question, and becomes more specific.
What can you do if you are a full-grown adult, but never experienced being a child?
One is “what exactly is in a ‘surge protector’ ? ”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
I post the exact comment here.
[old diagram got deleted by accident]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It seems Mohan does not understand the difference between a comment and an Answer.
The third is lightning and “how it gets conducted into a home.”
In schematic diagrams this is the symbol for a fuse:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
If you get a chance to have sex with either Kajal Agarwal or Samantha, who would you choose and why?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
First Sentence:
so, what happens?
Edit 2024–10.
But it can get overloaded, and no longer works.
Are miracles real or do they just have natural explanations?
One
At one ohm, the resistor has a maximum of 1 watt power.
eight
Elden Ring Nightreign maintenance makes matchmaking less of a headache - Eurogamer
2024–10–10[John johnson John Johnson ]
He then describes Rainy Season and Lightning.
This one hit behind the barn.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Because the load is inductive, the current lags the voltage.(by a bit).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
[image of Common-mode choke]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is where the MOV conducts again, and dissipated the energy.
An AC voltage/ current source, and an ac inductive load.
So, the voltage could go up to 500 volts, and the fuse will not open up.
He then describes the function of a fuse.
There are three different concepts here that are getting confused.
the problem then depends on "how fast does the fuse operate?".
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–16 [ OO OLAOYE OYEBODE ]
A fuse is a non-resetable over current circuit protector.
This device then solves the entire problem.
but I think this circuit , shows a few more pieces.
For this case there are devices called Metal oxide varistors (MOV).
At least they know the answer if they wanted it.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Here is a simplified AC power diagram.
A circuit breaker is similar, but is resettable.
These are simplified answers to the original question, and does not change anything I wrote above.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What does a fuse do?
Barnstars:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
(Dc diagram shown, AC is similar).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–14 [Omar Gharbi Omar Gharbi ]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Upvotes:
The other is “what does a “fuse” do?”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
These devices are installed between the “hot” and “neutral” and protective ground.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is 'the assistant's answer'
nine
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
a photo is worth a thousand words.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It also is a device that limits the change in current flow.
He then asserts :
But… the neutral is now “floating” because of the 1 ohm resistance.